Every golfer knows the thrill of a perfectly struck shot, the satisfying sound of the club connecting with the ball, and the anticipation as it soars through the air.
In this article, we’ll delve deep into the world of the best epoxy for golf clubs, ensuring your clubs remain in top condition and your game stays on point.
Best Epoxy for Golf Clubs: Top Brands
When it comes to ensuring the longevity and performance of your golf clubs, selecting the right epoxy is paramount. Here are the top 4 epoxy adhesives that have garnered acclaim in the golfing community:
Brampton Epoxy Pro-Fix 20/20 Long Cure Golf Club Repair
- Bond Strength: Aerospace Grade Bond Strength of 5800 psi, suitable for golf swings exceeding 120 mph.
- Compatibility: Adheres to all shaft types, including graphite, steel, and titanium.
- Cure Time: Sets with a hard bond within 20 – 30 minutes and fully cures in 20 hours. It’s also formulated for easy head removal without damaging graphite shafts.
GolfWorks High Strength Epoxy Golf Club Head Shaft Adhesive 50 ml
- Strength: Formulated specifically for Clubmakers, it offers high torque resistance.
- Properties: A two-component epoxy mixed at a 1:1 ratio. Sets in 18 hours and cures in 24 hours.
- Packaging: Comes in a 50ml cartridge with a thumb plunger, eliminating the need for an epoxy dispensing gun.
Gorilla 2-Part Epoxy, 5-Minute Set, Clear
- Benefits: Gorilla Epoxy comes with a syringe that dispenses both the resin and hardener simultaneously, ensuring a perfect mix ratio every time.
- Strength: Known for its incredible bond strength, Gorilla Epoxy can handle the stresses and forces exerted during a golf swing.
- Compatibility: Its formula is designed to fill voids between surfaces, ensuring a tight bond even if the fit isn’t perfect.
J-B Weld Steel Reinforced Epoxy
- Strength: Boasts a high tensile strength of 5020 psi, ensuring it can withstand the forces of a golf swing.
- Properties: Resistant to acid, water, and cracking from high impacts. It also has a high heat tolerance.
- Cure Time: Sets within 4 to 6 hours and cures within 15 to 24 hours, allowing for robust bonding.
How to Apply Epoxy to Golf Clubs
Applying epoxy to your golf clubs is a meticulous process that requires attention to detail. Done correctly, it ensures a strong bond that can withstand the test of time and the rigors of the game. Here’s a step-by-step guide:
Preparation:
- Clean the Surfaces: Use a brush or cloth to remove any old adhesive, dirt, or debris from the clubhead hosel and the shaft.
- Roughen the Surface: Lightly sand the inside of the hosel and the tip of the shaft to enhance the bonding surface.
Mixing the Epoxy:
- Measure: Depending on the epoxy type, measure out the correct ratio of resin to hardener.
- Mix Thoroughly: Use a mixing stick to blend the two components until they form a uniform consistency.
Application:
- Apply to Both Surfaces: Using a brush or spatula spread the mixed epoxy onto both the shaft tip and the inside of the hosel.
- Joining: Insert the shaft into the hosel, ensuring it’s fully seated. Rotate the shaft slightly to spread the epoxy evenly.
Setting and Curing:
- Hold in Place: Use a clamp or vise to hold the club head and shaft together while the epoxy sets.
- Cure Time: Allow the epoxy to cure for the recommended time, usually 12 to 24 hours, before using the club.
Conclusion
Selecting and applying the right epoxy is a pivotal step in ensuring the longevity and performance of your golf clubs. With the right knowledge and attention to detail, you can achieve a bond that withstands the test of time and the challenges of the game. Equip yourself with the best, and let your clubs reflect the quality of your game.
